How to make a whip with your own hands: instructions with pictures
There is a large amount of BDSM, although not everyone admits it. However, these devices are very expensive. Without even touching on the price of any device or car, you will have to shell out a considerable amount of money for a regular whip or handcuffs.
Contents of the article:
On the one hand, these things are necessary in the practice of BDSM, unless, of course, you are limited to almost vanilla with a silk scarf and light tapping on the palm of your priest partner. On the other hand, high quality goods are bought like a whole silk scarf.
Skillful hands can come to the rescue and make something from scrap materials. In this case, this “anything” could be a paracord whip.
It must be said that paracord is a type of nylon. It is light and strong. The latter can be judged only because it was used as a parachute line. Having successfully dropped thousands, you definitely won”t be able to lie like paracord.
As for the implementation technique, it is not particularly difficult, at least for those who know stupid things like weaving ropes and weaving knots. Of course, it is better for beginners not to take these instructions.
You will need to carefully and meticulously weave 12 chains at least 3. 5 meters long. And not everyone can do this. You also need to learn how to tie certain types of knots together to make the braid look beautiful.
The length of the resulting whip is 2. 5 meters. And with due diligence, you can spend at least a week on creation.
Instructions on how to make a whip with your own hands
— Paracord: 60 meters. It”s better to take more.
— Thin chain: 2 meters.
– Island or duct tape.
– Large nails. Those. large enough to form the base for a pen.
— Scissors or knife;
– Use a match or lighter to singe the ends of the paracord so that it unravels and is not disturbed.
– File. For cutting grooves in the handle.
– Deputies, you can hold the whip. However, you can simply secure it between your knees.
– Patience. The most important component.
As stated above, you will have to learn (or update your knowledge) to weave various knots. They are needed for both practical and decorative purposes. Since we don”t learn, we need to look for information ourselves. Fortunately, there are many sources of information.
However, here is a list of nodes that we need. Hemlocks with top knots, brands, ledges (for connecting strands), star knots (for handles), Turkish heads (for bases), Matthew Walker knots (for good fixation of the last knot of the handle), multi-lift knots for decorating handles (in braided or in the form of crowns).
So what kind of rope do you need? Our whip is made up of three layers: a base that gives it weight and elasticity, and two additional layers wrapped around it. For the base we need intercepting ropes with lengths of 2 m, 1 m, 80 cm and 50 cm. In addition, three thin chains with lengths of 90 cm, 60 cm and 30 cm are needed, each of which has a length of 1 m, 1 m, 80 cm and 50 cm respectively.
The first layer consists of eight chains woven into the braid (four chains folded in half to appear more precise). (in half). 7. 3 m, 1 strand — 5. 5 m, 1-5 m, 1-4. 3 m, these 2 strands are 1-3 m.
However, this is not an exact science. As a result, there are very few such calculations left. But this is better than weaving for several days and realizing that there is not enough rope. Right?
The required rope length depends on the weaving method and the thickness of the rope.
For this step you will need the first four strands of paracord and three chains. That is, paracord: 2 m, 1 m, 80 cm and 50 cm; chain: 90 cm, 60 cm and 30 cm.
And now a difficult and responsible moment will come. You should pull out the inner strands from the three shortest pieces of paracord and thread the appropriate length of chain through them. But this is very difficult to do. Many methods have been tried: by hand, with a needle, by tying wires. But nothing happened. There was only one option that worked perfectly. Carefully pull out the inner six or seven threads, tie the eighth thread to the chain with the smallest knot and slowly pull it out. The chain will take its place. If the last thread is pulled out without a chain, it needs to be pushed back. This is best done using wire. Alternatively, cut another paracord and try again.
Then you need to tie these first threads to the handle. Using a file, make a cut at the end of the nail. So you can tie paracord. Tie the strands together and spread them evenly across the nail, using one of the strands pulled from the paracord to secure it with a tapered cord instead of a groove. This should be done as tightly as possible. Otherwise, the braid will fall apart. The constrictor should then be secured with a brand to prevent it from moving. You can add a few more knots or tape for reinforcement, but be careful not to make the whole thing too thick. Trim the strands close to the knots (but not too close to avoid tangling).
In order for the whip to bend in any direction, the strands must be twisted correctly and efficiently. If you”ve made twisted rope before, you shouldn”t have too much trouble. If not, you can watch a video that will show you how to make a twisted rope that will bend in all directions. Basically, each strand should be twisted slightly in one direction, then placed next to another strand and twisted in the opposite direction.
Read also: How to make a female pathogen with your own hands at home?
A woman”s sexual desire depends on many factors. She is influenced by the surrounding atmosphere, state of mind and personality of the partner with whom she is.
When everything is well twisted, the inside should be wrapped with tape. The adhesive tape should be placed at a 45° angle to the strands and wrapped around one even strip to the end of the third strand. The base should be flat and round. If duct tape is not enough, you can add a layer of electrical tape.
Now you can proceed to the first layer. Weave an 8-strand braid using paracord of the required length. 2 strands of 5 m each (or 4 strands of 2. 5 m each), 1 strand of 3 m each (or 2 strands of 1. 5 m each) and 1 strand of 4. 3 m each (or 2 strands of 2. 15 m each). The inner strands need to be pulled out and used later. Remember that you need to burn the strands first. This will flatten the inner paracord. It can be further straightened by wrapping it around a pipe.
Four threads need to be bent in half. You will need to work in the middle of the cord. It doesn”t matter how precisely they are grouped.
Take the first pair (again, it doesn”t matter which one) and cross them in front of the handle.
Pass the second pair through the loop. The main thing is that the length is the same everywhere.
Now let”s move on to the main part of the braid. Don”t be afraid. It”s not as scary as it seems, and it”s easy to remember. The main thing is that the strands are even, neat, and don”t cross.
There are four strands on each side. Start in the upper right corner. At this point, this strand becomes the “working strand.” Take the working chain, wrap it around your back, and wrap it so that it comes out on the left side, leaving four strands remaining. Under the first two, make a working chain on the last two. Turn to the right side. The working chain remains with the remaining three strands on the right side. It starts at the top right and ends at the bottom right. This is one section. Do the same with the top strand on the left side, wrapping it only around the strand on the right side.
This is the focus of the entire process. Take the top strand and pull the first two strands through it to the other side, then pull the bottom of the second two strands through and place it across again so that the strands are underneath. Then we repeat the whole thing over and over again.
How to start and finish weaving arapnik. my way!!!
Regularly pull the strands along the braid. When you reach the point where the shortest strand ends, you”ll encounter another problem: the strands are too long. But more on that in the next step.
When you reach the point where the braid thins, you need to shift two working strands so that their number continues to match the thickness. This is also just a step, and there shouldn”t be any problems transitioning to six strands from eight. At this point, two strands should be almost finished (10-15 cm or so). Then we throw these strands away. As you braid, lift each strand up one at a time. The strands should be dropped just before this. Simply allow the strands to fall below the surface so that all the chains on the corresponding side are aligned. Then, fill in the two bottom strands approaching the crown. This leaves us with three strands: the top strand and two strands. Then, continue working on the top strand on the opposite side, as if nothing happened. Only now we”re working on one strand, and two less. Make sure the dropped strand is securely fastened to the lashes by the working strand.
Repeat all this when the next strand appears.
The main thing to remember is that the weaver is now going through one strand on the opposite side and one strand on the bottom of the two.
After a couple of passes, when it becomes clear that the strands are sufficiently fixed, they can be cut out. Both will remain spat upon and hidden.
At some point, the lash will become thin again, and the next two threads will need to be thrown over again. The technology remains the same. If the spine consists of four strands, then the formula looks like this: The working strand passes through one strand and under one strand. The warp should float until it turns into one strand of paracord. There should be 15 centimeters left.
The strands then need to be temporarily secured with duct tape until the second layer is ready. For convenience, the braid can be thinned out to mark the places where the strands needed to be thrown. In these places you can tie small bundles or use adhesive tape.
At this stage, our entire structure should already resemble a whip. However, now is not the time to play with her, but you still need to finish something. For example, it is worth strengthening the transition from the handle to the base, which causes more confusion. You need to apply several knots, wrap the rope several times and pull it very tight.
Then you need to wrap it all with ribbon and create an island.
It”s scary, isn”t it? But in reality, everything is not so difficult. First you need to cut the paracord to the required length: 7. 3 m, 1 thread — 5. 5 m, 1-5 m, 1-4. 3 m, 1-3 m, 2 threads. He bent twice and straightened up.
Braids are also braided, only the strands are grouped (the working strand passes over the top 3 and under the bottom 3). Remember to tighten your braids and braid carefully. Gradually, when the mark is reached, throw away the strands. Weave 8 strands until we reach the point where we temporarily secure the strands with tape. Remove the tape, cut two short strands of the inner layer and continue braiding over it. After reaching the last point, leave it (should be 10-15 cm).
Some difficulties may arise here. At the end we have 4 braid strands and one base. Cut the paracord (don”t forget to singe the ends). Make a hole in one end and go through the other end. Place this loop on the end of the braid. Now it’s all tied up and brings only beauty. In theory, everything is quite simple: each of the 5 threads should be tied around every other thread. In practice, it is very difficult to get confused in this, so it is better not to delay.
When all five knots are tied, you need to take something thin (like a knitting needle) and pull the last thread through all the knots. Then pass the ends through the loop and pull out the tightened folus tank so that it is inside the knot along with the last strand. Trim the ends, tying them tightly together.
This is the last thing you need to do to ensure the whip is fully functional. This is the part that displays the same sound when you wave your hand. And this is the part of the whip that wears out and requires regular replacement. However, it is very easy to do.
We cut the paracord. Fold it in half and twist it. Tie both ends with a simple knot. Yes, the end needs to be raised a little. Then we tie the whip to the foul.
Congratulations, you”ve made your whip. Now you can decorate it as you wish. For example, make a star knot on the handle or a Matthew Walker knot on the end. Let the whip reveal its unique capabilities by using different colors of paracord, wrapping the handle in leather, using different types of braids and knots, and using wooden handles instead of nails.
Now it”s time to spoil your new toy. And this is the main technique, not the strength of the big ones. There are a huge number of videos on how to use wraps correctly. Better study them thoroughly before trying to pretend to be Indiana Jones. And don”t forget to use protection on your face first.
How to make a flogger | diy flogger
